You are currently viewing Common Geyser Problems in India 2021
Male Worker With Clipboard Adjusting Temperature Of Water Heater

Common Geyser Problems in India 2021

Spread the love
geyser problems

A geyser problems is an appliance which is needed in most of our homes and offices since it fulfils the purpose of providing us with warm water in kitchens and bathrooms. Hot water geyser or simply geyser is highly useful and often a necessity, both in hot and cold countries. However there are some problems that may come up in geysers and may need resolution as fast as possible so that you can enjoy uninterrupted usage or function. This article will talk about the most common geyser problems along with their appropriate solutions:

1. A dripping geyser problems

One of the most common geyser problems include a dripping geyser.  It is a fact that geysers often drip or leak water through the pressure control valve overflow pipe. A little bit of dripping is normal but if it is more than just a few liters then this can be an indication of a faulty control valve.  Get this valve checked and get it replaced if there is no chance of repairs.

2. Overheating geyser geyser problems

Another one of the most common geyser problems is an overheating geyser.  Sometimes the geyser may not close or go off even in the ‘off’ position and this can lead to not just overheating of water but also exploding of the geyser.  You can notice this if there is steam coming out of the geyser along with hot water.  This basically means that pressure valve and temperature is releasing hot water since the temperature and pressure both are building up. This can be an indication of a faulty thermostat.  In this case, switch the geyser off and call Home Appliance Care.

3. Water not hot enough or no hot water at all

Another common geyser problem is when the water obtained from the geyser is not hot enough or not hot at all.  If there is no hot water at all then in that case you must check the geyser circuit breaker on the main distribution and see whether it is tripped or not.  You must reset the circuit breaker once or twice. If it continues to trip then you may need to call Home Appliance Care.  If the problem is not with the power supply then the heating element or the thermostat may be faulty.  Then you may need to replace it.

4. Water leaking through the ceiling

If the water is leaking through the ceiling then this may indicate that either the geyser has burst or a major leak may have developed.  In some cases this could also be due to the drip tray and overflow system may not be coping.  In this case switch off the power supply as well as the cold water supply to the geyser.  Call Home Appliance Care for getting the problem resolved.

Now that you know the most common geyser problems and their solutions, you can find a cure to the issue yourself. If your geyser does not heat water or is facing some other problems, then you can call Home Appliance Care.

Safety and Maintenance Guide for Geysers: Common Problems and Solutions

A geyser, or water heater, is a crucial appliance in many households, providing hot water for bathing, cleaning, and other daily activities. However, like any other appliance, geysers can develop issues over time, which can compromise their efficiency and safety. In this article, we’ll discuss some common problems with geysers and provide solutions to ensure their safe and optimal operation.

1. Sediment Build-up: One of the most common problems with geysers is the accumulation of sediment at the bottom of the tank. This sediment is usually made up of minerals and debris from the water supply and can cause the geyser to work less efficiently and lead to overheating.

Solution: Regularly flushing the geyser can help remove sediment build-up. Turn off the power and water supply to the geyser, connect a hose to the drain valve, and drain the tank completely. Repeat this process every few months to prevent sediment build-up.

2. Overheating: Geysers can sometimes overheat, which can be dangerous and lead to leaks or even explosions in extreme cases. Overheating can be caused by a faulty thermostat or a build-up of sediment.

Solution: Ensure that the thermostat is set to the correct temperature (typically between 120-140 degrees Fahrenheit). If the thermostat is faulty, it should be replaced by a qualified technician. Regular flushing of the tank can also help prevent overheating.

3. Leaks: Leaks are another common problem with geysers and can be caused by corrosion, high water pressure, or faulty valves.

Solution: Inspect the geyser regularly for any signs of leaks, such as water puddles or dampness around the base. If you notice a leak, turn off the power and water supply to the geyser and contact a qualified technician to repair the issue.

4. Pressure Relief Valve Issues: The pressure relief valve is an important safety feature of geysers that releases excess pressure to prevent explosions. However, if the valve is faulty or blocked, it can lead to a dangerous build-up of pressure.

Solution: Test the pressure relief valve regularly by lifting the lever to release some water. If the valve does not release water or leaks continuously, it should be replaced immediately by a qualified technician.

5. Electrical Problems: Geysers are powered by electricity, so electrical issues can also occur. These can include faulty wiring, blown fuses, or tripped circuit breakers.


If you suspect an electrical issue, turn off the power to the geyser and contact a qualified electrician to inspect and repair the problem.

In conclusion, regular maintenance and inspections are crucial for ensuring the safe and efficient operation of geysers. By following the tips and solutions outlined in this article, you can help prevent common problems and ensure that your geyser remains in good working condition for years to come.

where to buy

Leave a Reply